Annealing
Annealing heats metal to a defined temperature and cools it slowly to reduce hardness, relieve internal stresses, and produce a softer, more formable structure.
Processes
Select a process to see how we treat your parts.
Annealing heats metal to a defined temperature and cools it slowly to reduce hardness, relieve internal stresses, and produce a softer, more formable structure.
In normalizing, the part is heated to a suitable temperature and cooled in still air to obtain a more uniform structure, balanced mechanical properties, and a refined grain size.
Hardening increases hardness and wear resistance, typically by heating the part to a set temperature and then cooling it rapidly.
Tempering usually follows hardening to reduce brittleness while retaining useful hardness and improving toughness and impact resistance.
Quenching is rapid cooling of a hot part in water, oil, air, or another medium to form a harder microstructure.
Stress relieving removes or reduces residual stresses from welding, machining, casting, or forming, improving dimensional stability.
Age hardening (precipitation hardening) holds an alloy after solution treatment at ambient or elevated temperature so fine precipitates form and raise strength and hardness.
Carburizing is a thermo-chemical process that diffuses carbon into low-carbon steel so the surface becomes hard and wear-resistant while the core stays tough.
Carbon enrichment covers processes that add carbon to the metal surface to improve case-hardenability and raise wear resistance.
Carbonitriding combines carbon and nitrogen diffusion into the surface, improving surface hardness, wear resistance, and to some extent dimensional stability.
Homogenizing equalizes chemical composition and internal structure—especially in cast parts—and helps reduce elemental segregation.
Induction hardening uses induced current to heat only the surface rapidly, then cools it so a hard case forms with little change to the core.
Company
Hard Steel delivers precision heat treatment for industrial components. From hardening to tempering, we keep metal performing under load.